Dog scarf

I have two dogs and we have enjoyed dressing them up every once in awhile.  I've tried various scarves but they usually don't care for them and will pull at them until they finally come loose.  I have found that this simple scarf that wraps around the collar works great.  It's not to big so, it does not seem to bother them and, since they are attached to the collar they stay on.  They are very simple to make and a great way to use up small scraps you may have.  I'm thinking I should make them some more for holidays, various seasons of the year etc.  Here is how you make them

Pattern

I used grid paper and measures 6 inches across, then 3 inches down on each side.  I found the center point on the 6 inch line (3 inches) and drew another line straight down that was 6 1/2 inches.  I then matched up the 3 inch side to the center.  Here is a picture:

 I cut out a single piece of fabric using the fabric and finished off the 3 inch sides and the diagonal  lines by folding it over twice about a scant 1/4 inch wide.  The 6 inch side is folded over 1/4 of an inch then folded down again until the 1 1/4 inches.  A seam holds it in place.  You should now have a pocket to thread in the collar.

Tips:
The pattern can be made larger or smaller depending on the size of the dog and the "style" they prefer.  Keep in mind the width of the collar when making adjustments.  The pocket fold must be wide enough to fit the collar through plus, any thick/wide buckles it may have on it.

Another tip for finishing the seams is to do the 2 three inch sides first and then do each diagonal line.  Prior to the final diagonal line, make a small clip on the bottom to cut off the point.  This will make for a more finished look.  Here are pictures to show the process:

Finishing side and bottom seams.  Note the small clip I made at the point before turning the final side

Making pocket for collar

Collar slipped into pocket

The final scarf.  It's small enough not to bother the dog but adds that extra level of dog cuteness!!